Signing and Delineation Unit (SDU) Procedures Manual  

:
SectLink
  
collapse Title : 01 INTRODUCTION ‎(5)
collapse Title : 02 PRINCIPALS ‎(7)
collapse Title : 03 PROJECT DELIVERY REQUIREMENTS ‎(9)
collapse Title : 04 SIGNING PLANS ‎(20)
collapse Title : 05 PAVEMENT MARKING AND DELINEATION PLANS ‎(21)
collapse Title : 06 REVISIONS ‎(5)

  • 05 PAVEMENT MARKING AND DELINEATION PLANS

  • 5.12 Yield Bars (Lines)

  • ​Yield Bars shall be used to indicate the point behind which vehicles are required to yield in compliance with a Yield sign (R1-2) or a Yield Here to Pedestrians (R1-5 series) sign.  Yield bars shall not be used without an accompanying traffic control device, i.e. a Yield Sign or a Yield Here to Pedestrians sign.

    For channelized right turns requiring a crosswalk, if the yield bar is past the crosswalk, verify that appropriate spacing is provided in accordance with MUTCD between the crosswalk and the yield bar.  If not, the yield bar and yield sign shall be in front of the crosswalk.

    Applicable Standards

    1205.08 SHEET 2 OF 9    PAVEMENT MARKING – SYMBOLS AND WORD MESSAGES

    1205.14                          PAVEMENT MARKING – ROUNDABOUTS

    Additional Resource

    MUTCD Section 3B.16 Stop and Yield Lines (Link)
Was this page helpful?