Sign In

Contract Standards :

Attachments
  
Title
  
Modified
  
Body
ID
  
  
1/20/2023 8:21 AM
AGC-DOT Joint Cooperative Committee
February 23, 2023 10:00AM
DOT CCB Riverwood Conf Room / Microsoft Teams Remote Conference
10
  
9/20/2017 2:04 PM
Ron Davenport, PE
State Contract Officer

1591 Mail Service Center
Raleigh, NC 27699-1591

 Telephone: (919) 707-6900
 FAX: (919) 250-4119
5
  
10/23/2012 1:52 PM

Below are the Roadway Standard Drawings in PDF and TIF format.
Roadway Standard Drawings are not provided in any cad format (i.e., microstation.dgn/autocad.dwg

2006 Roadway Standard Drawing Index of Sheets English

2006 Roadway Standard Drawing - Metric Index of Sheets

For an Explanation on the Modifications of these Drawings from 2002 to the new 2006 Standards English

6
  
10/18/2012 10:01 AM
Details to be used in lieu of 2012 Roadway Standard Drawings
 
If any part of the "Detail Drawings" are required, please insert ALL drawings in the Roadway Plans. DO NOT cross out any drawings in the set.
 
Below are Details to be used in Lieu of the 2012 Roadway Standard Drawing 1205 in PDF format.  Individual Detail Sheets for viewing and printing. (DO NOT insert these sheets into the Roadway Plans)
3
  
10/10/2012 2:21 PM

The Local Government Agecny (LGA) content is prepared by the Contract Standards and Development Unit (CSDU) to aid LGAs in the preparation of their Bid Proposal. Each project proposal will be evaluated individually and must be reviewed and approved by the NCDOT State Contract Officer or the Division office. 

Click here to read all information for First Time Users.

Click here to find out what the Bid Proposal should include.​

4
  
9/13/2012 1:51 PM

The date is the let date when this provision was first available for use. Updated 7/16/2012.​

9
  
8/30/2012 1:32 PM
The following documents contain the NCDOT Standard Drawings.
Roadway Standard Drawings are not provided in any CADD format
(i.e., microstation.dgn/autocad.dwg)
 
2
  
8/30/2012 1:32 PM

Roadway Standard Drawings are not provided in any cad format (i.e., microstation.dgn/autocad.dwg)

The first six digits of the file name correspond to the standard drawing number. The last two digits of the file name correspond to the sheet of the drawing. Therefore, file 02000102.tif is standard drawing 200.01 sheet 2. The first two digits of the file name indicate the section of the standard specifications which the drawing falls into. The standard specification sections are listed in the table below. Click on a section name to display the drawings for that section.
 
Details to be used in lieu of the 2002 Roadway Standard Drawings in TIFF format in English and Metric Units.
 
If any part of the "Detail Drawings" are required please insert ALL drawings in the Roadway Plans. DO NOT cross-out any drawings in the set.
7
  
8/30/2012 1:32 PM
This electronic version of the North Carolina Department of Transportation Standard Specifications for Roads and Structures Book dated July 2006 has been provided as a service to the public. In case of a discrepancy between the published book and this electronic publication, the printed, published book will prevail. This NCDOT Specifications Book will be effective beginning with the July 2006 letting. Users are cautioned that if a project is advanced to a letting date prior to July 2006, the January 2002 Specifications Book will apply and the conditions of that publication must be met.
​

 

8