expand Material : 01 AGGREGATE ‎(7)
expand Material : 02 ASPHALT  ‎(7)
expand Material : 03 CONCRETE ‎(7)
expand Material : 04 PIPE ‎(7)
expand Material : 05 STEEL ‎(5)
  
expand Service Group : 00 ADMINISTRATIVE GROUP ‎(2)
expand Service Group : 01 ASPHALT MATERIALS AND SERVICES GROUP ‎(3)
expand Service Group : 02 GEOMATERIALS AND SERVICES GROUP ‎(3)
expand Service Group : 03 STRUCTURAL MATERIALS AND SERVICES GROUP ‎(3)
expand Service Group : 04 FIELD OPERATIONS ‎(2)
expand Service Group : 05 DATA COLLECTION AND INVESTIGATIONS ‎(8)
expand Service Group : 06 PAVEMENT DESIGN AND ANALYSIS ‎(6)
expand Service Group : 07 QUALITY SYSTEMS (COMPLIANCE) ‎(3)
expand Service Group : 08 STOCKROOM ‎(4)
  
expand FAQ : HiCAMS - MATERIALS AND TESTS ‎(3)
expand FAQ : MATERIALS ‎(7)
expand FAQ : SERVICE GROUPS ‎(2)
  • 03 STRUCTURAL MATERIALS AND SERVICES GROUP

  • Lab Testing Services

  •         
     

    AGGREG​ATES
     

    ​Material

    Typical Turnaround (Business Days) Standard Lab Test Method Specification Reference
    ​AASHTO ASTM

    ​Coarse: #5,57,57M,

    67,78M,8,9

    ​14

    T27, T112, T85, T96, T104, T19, T11, T248

    C136 C142 
    C127 C131 C29 
    C117 
    C702 C566

    None 1005-1
    Fine: 2MS, 2S, 4S 14 ​T27, T112, T84,  T104, T19,  T21,
    T11,  T248
    ​C136 C142 
    C128  C87 
    C40 
    C29  C117 
    C702 C566
    ​None None​
    ​#78-M Stone for Electro-chemical 5 None None ​MT-C-ELEC

    ​NCDOT Geotechnical Engineering Unit:MSE Retaining Walls Provision (LRFD)


    BOLTING MATERIAL
     
    Material Typical Turnaround (Business Days) ​​​Stan​dard ​​​​Lab Test  Method Specification Reference
    AASHTO ​ASTM
    ​Bolts, Anchor ​14 M232
    ​A307 
    grade A
    A449
    None 1072-4
    ​Bolts, High Strength 14 ​None

    A325

    None 1072-5
    Bolts, High Strength with Nut and Washer​ 14 None
    A325
    A194
    A563
    F436
    ​None 1072-5
    ​Nuts ​​14 ​None

    ​A194
    A563​
    ​None 1072-5
    ​Washers ​​14 None F436​ ​None 1072-5
    Direct Tension Indicators 7​ None​ A325
    B695​
    None 1072-5

    CEMENT  
     
    Material Typical Turnaround (Business Days) ​​​Stan​dard ​​​​Lab Test  Method Specification Reference
    AASHTO ​ASTM
    Cement, Portland, Type XX​ 14​
    M85
    T105
    C150
    C114
    C-XRF-10.1
    C-XRF-1000.1
    1024-1
    ​Cement, Portland – For Masonry ​14​ None​ C91​
    C-XRF-10.1
    C-XRF-1000.1
    1040-5​
    ​Cement, Portland for Stabilization 14
    M85
    T105  
    C150
    C114​
    C-XRF-10.1
    C-XRF-1000.1
    542-2
    ​Cement, Portland, for Chemistry 7
    M85
    T105
    C150
    C114
    C-XRF-10.1
    C-XRF-1000.1
    ​Hydraulic Cement Acceptance Program

    CHEMISTRY OTHER
      
    Material Typical Turnaround (Business Days) Standard Lab Test Method Specification Reference
    AASHTO ASTM
    Chemical Lab Cable Guiderail 14 M30 Type 1, class A None None 1046-7
    Chemical Lab Chloride Content
    7
    T260 None
    C-4.0
    XRF-1100
    None
    Chemical Lab Concrete Core 14 None C-1084
    M/T C-12.5
    C-XRF-1000.2
    None
    Chemical Lab Grout Mix 14 None None
    C-XRF-20.1
    C-XRF-20.2
    None
    Chemical Lab Loop/Lead in Cable 14 None D1248 None 1098-8
    Chemical Lab Messenger Cable 14 None A90 Procedures for Determining the Amount of Zinc on Extra High Tensile Strength Steel Messenger Wire 1098-3
    Chemical Lab Metal Composition 14 Varies None
    C-XRF-30.1
    C-XRF-3000.1
    Varies
    Chemical Lab neoprene 5 M251 None None 1079-2
    Chemistry, Other Varies Varies Varies Varies Varies

    CONCRETE
      
    Material Typical Turnaround (Business Days) Standard Lab Test Method Specification Reference
    AASHTO ASTM
    Concrete Cylinders for Corrosion Inhibitors 7 None None C-20.1 1000-4(K)

    Concrete Cylinders for Compression:

    Class AA, AA Slip Form, Drilled Pier, A, B, B Slip Formed, Pavement

    28 T22
    T23
    C617
    C1231
    C39
    None Table 1000-1
    Concrete Cylinders for Compression: Precast 28 T22
    T23
    C617
    C1231
    C39
    None Table 1077-1
    Concrete Cylinders for Compression: Prestress 28 T22
    T23
    C617
    C1231
    C39
    None Table 1078-1
    Concrete Cylinders for Compression, Latex Modified 7 T22
    T119
    T152
    C617
    C1231
    C39
    None
    PSP004 Latex Modified Concrete-Very Early Strength
    PSP003 Latex Modified Concrete
    Concrete Cores for Absorption 7 None None None None
    Concrete Cores for Strength 5 None C39
    C42
    None None
    Shotcrete 28 None C39
    C1140
    C1604
    None None
    Elastomeric Concrete 14 None None None PSP005 Elastomeric Concrete

    FENCING MATERIALS
     
    Material Typical Turnaround (Business Days) ​​​Stan​dard ​​​​Lab Test  Method Specification Reference
    AASHTO ​ASTM
    ​Metal Gate Posts for Chain Link Fence, Double Gate 7
    M181
    M232
    F626
    F1043
    ​None 1050-3
    ​Metal Gate Posts for Chain Link Fence, Single Gate ​7
    M181
    M232
    F626
    F1043
    None 1050-3
    ​Metal Line Posts for Chain Link Fence 7
    M181
    M232
    F626
    F1043
    ​​None 1050-3
    ​Metal Terminal Posts (“Corner Posts”) for Chain Link Fence 7
    M181
    M232
    F626
    F1043
    ​​None 1050-3
    ​Brace Wire ​​​7 ​None A641 ​None 1050-5​
    ​Female Strap Hinge 7 ​M181 None None ​Table 2, Section 1050
    ​Fencing Hardware 7 ​M​232 ​None None 1050-7
    ​Male Strap Hinge 7 M181 None ​​None ​Table 2, Section 1050
    ​Tension Wire ​​​​7
    M181
    B211
    ​​None ​1050-7
    ​Top Brace Post ​​​​7 None F626 None 1050-3
    ​Chain Link Fence, xx in. Fabric 7
    M181
    F934

    None

    1050-6

    ​Safety Fencing ​​​​​7 M181

     
    F934 ​​None 1050-6
    ​Vinyl Coated Chain Link Fence, Fabric ​​​​​7 M181                        F934 None 1050-6
    ​Woven Wire Fence ​​​​​7 M279 A116 ​​None 1050-5
    ​Barbed Wire ​​​​​7 None A121 None 1050-4
    Galvanized fastener Inspection – Bolts, Hexnuts, washers ​​​​​7
    M181
    M232
    None​ ​None 1050-7

    GRATES, GUARDRAIL, GUIDERAIL
     
    Material Typical Turnaround (Business Days) ​​​Stan​dard ​​​​Lab Test  Method Specification Reference
    AASHTO ​ASTM
    ​​Steel Frame with XX Grates ​7
    M306
    None
    C-XRF-30.1
    C-XRF-3000.1
    1074-7
    Bridge Anchor Plates
    7 ​​None A36
    C-XRF-30.1
    C-XRF-3000.1
    1046-5
    Guardrail, Steel Beam 7 M180 None
    C-XRF-30.1
    C-XRF-3000.1
    1046-2
    ​Post, Guardrail, Steel 7 None A36 None 1046-3
    Guiderail, Cable
    Cable for Cable Guiderail
    7 None A30 type 1, class A None ​1046-7

    JOINT FILLER, LATEX
     
    Material Typical Turnaround (Business Days) ​Standard ​​  ​​​Lab Test Method Specification Reference
    AASHTO ​ASTM
    ​Joint Filler, Bituminous Fiber 7
    M213
    T42
    MIL-C-882E
    None ​M-1
    MIL-C-882E
    1028-1
    ​Latex, Liquid ​1
    ​None
    D1475
    D2369
    ​C-LM-DPS-A ​1000-7

    METALS
     
    Mate​rial Typical Turnaround (Business Days) Standard Lab Test Method Specification Reference
    AASHTO ASTM
    ​​Light Standard, High Mount 14
    None
    None
    C-XRF-30.1
    C-XRF-3000.1
    ​1401
    ​Metal Alloy – For Chemistry 14 Various Various
    C-XRF-30.1
    C-XRF-3000.1
    ​Various
    ​Metal Rail, XX Bar 14
    None
    A36
    A123
    C-XRF-30.1
    C-XRF-3000.1
    1074-5
    Clamp Bars​
    14
    ​None
    A36
    A123
    C-XRF-30.1
    C-XRF-3000.1
    ​​1074-5
    ​Aluminized Corrugated Steel Pipe Culvert, xx Gage, xx in thick, xx in 14 M36 None
    C-XRF-30.1
    C-XRF-3000.1
    1044-5
    Reinforcing Steel, (Plain Epoxy Coated) Reinforcing Steel Bar Supports 14 None​ None​
    None​
    None
    Sheet Steel, Aluminum
    14 M196 None​
    C-XRF-30.1
    C-XRF-3000.1
    1032
    ​Sheet Steel, Aluminum Coated 14 M36
    M274
    None​
    C-XRF-30.1
    C-XRF-3000.1
    ​1032
    ​Sheet Steel, Plain for Guardrail - xx gage ​14 M36 ​None
    C-XRF-30.1
    C-XRF-3000.1
    1046
    ​Sheet Steel, Zinc Coated ​14 M36 ​None
    C-XRF-30.1
    C-XRF-3000.1
    ​1032
    ​Sheet Steel, Zinc Coated for Metal Pipe - xx Gage 14 ​M36 ​None
    C-XRF-30.1
    C-XRF-3000.1
    1032
    ​Overhead Sign Assembly, Steel 14 None ​B695,
    Class 55
    C-XRF-30.1
    C-XRF-3000.1
    1096
    ​Structural Steel 14 ​Various ​Various
    C-XRF-30.1
    C-XRF-3000.1
    1072
    ​Aluminum Structural Base Plate ​14 None None
    C-XRF-30.1
    C-XRF-3000.1
    ​SP
    PAINT
      
    Material
    Typical Turnaround (Business Days) ​​Standard Lab Test Method Specification Reference
    AASHTO​ ASTM​
    Painting Structural Steel
    14 Various Various
    Various 1080

    HDPE PIPE
      
    Material
    Typical Turnaround (Business Days) ​​Standard Lab Test Method Specification Reference
    AASHTO​ ASTM​
    HDPE Plastic Pipe 14 M285
    M294
    ​D3350
    D1505
    D1238
    None
     
     

    POZZOLANS
      
    Material
    Typical Turnaround (Business Days) ​​Standard Lab Test Method Specification Reference
    AASHTO​ ASTM​

    Fly Ash

    14​ None C618 ​C-10.0 to 10.4
    XRF-4000.1
    1024-5
    ​Ground Granulated Blast Furnace Slag 14 ​M 302
    Grade 100
    ​None C-10.0 to 10.4
    XRF-4000.1​​
    ​1024-6
    ​Silica Fume ​14 ​None ​C1240 Tables 1, 2 and 3 None 1024-7​

    LIMESTONE
     
    Material Typical Turnaround (Business Days) ​​​Stan​dard ​​​​Lab Test  Method Specification Reference
    AASHTO ​ASTM
    Subgrade Stabilizer, Chemical
    Hydrated Lime
    7 None C977​
    C-XRF-20.1
    C-XRF-2010.1
    1052-3
    Subgrade Stabilizer, Chemical
    Quicklime
    7 ​None C977​
    C-XRF-20.1
    C-XRF-2010.1
    ​​1052-3

    WATER
     
    Material Typical Turnaround (Business Days) ​​​Stan​dard ​​​​Lab Test  Method Specification Reference
    AASHTO ​ASTM
    Water – For Miscellaneous Use 7
    T26
    D512
    D1125
    D516
    ​W-15.5
    Standard  Methods for Examination of Water and Wastewater
    1024-4
    ​Water for Concrete ​14
    T26
     
     
    D512
    D1125
    D516
    ​​W-15.5
    Standard  Methods for Examination of Water and Wastewater
    1024-4

    ZINC
     
    Material Typical Turnaround (Business Days) ​​​Stan​dard ​​​​Lab Test  Method Specification Reference
    AASHTO ​ASTM
    ​Zinc 7 ​M120 None​
    C-XRF-30.1
    C-XRF-3000.1​
    ​1076
    ​Zinc Coating Check – Hardware ​7 M111 None ​None
    1076

Was this page helpful?