Materials and Tests Manual

Materials

Service Groups

Frequently Asked Questions

Materials & Tests

MContact Form
For questions & feedback about this area of Connect NCDOT, contact Materials and Tests.
nEmployee Directory
Staff contacts for Materials and Tests.

05 STEEL

Field Inspection and Sampling

Contents

APPROVED STRUCTURAL STEEL WELDING PROCEDURES

RECEIVING AND ACCEPTING STEEL PRODUCTS

MECHANICALLY STABILIZED EARTH WALLS

For more information on topics within this section, contact the Manufactured Products Service Group.

APPROVED STRUCTURAL STEEL WELDING PROCEDURES

3G-4G Plate Certification

Armor Angle Field Splice

Concrete Girder Slip Angle

Double Bevel Groove with Back Gouge

Double V-Groove with Back Gouge

Encasement Pipe

Fillet Weld

Fillet Weld Certification

H-Piles

Overhang Bracket

Pipe Certification

Single U-Groove with Back Gouge

Single V-Groove with Backing

SIP Weld Certification

Soldier Pile

Steel Girder Bearing Plate

Steel Girder Pot Bearing

Steel Girder SIP Angle

Steel Girder SIP Strap

Stud Welding

Jack and Bore

Rebar Indirect Butt Joint with Splice Angle

RECEIVING AND ACCEPTING STEEL PRODUCTS

Acceptance Procedures for Reinforcing Steel

MT909 Adhesively Anchored Anchor Bolts/Dowels Installation Test Report

M4900 Non Conformance Report (NCR)

Stay In Place Forms Inspection SOP

Form 411 - Stay In Place Inspection Form

Temporary Steel Panel Bridges (Powerpoint Presentation)

Guide to Inspection of Hot-Dip Galvanized Products

MECHANICALLY STABILIZED EARTH WALLS

MSE Walls Aggregate Sampling and Testing

MSE Walls Aggregate Sampling Quick Reference

MSE - 3 Guide for MSE Wall Corrosion Monitoring Kit Installation

Sine Wall Alternative Strap Mounting

Was this page helpful?

Yes
No

© North Carolina Dept. of Transportation |
Privacy Statement |
Accessibility