​​
DISCIPLINE REQUIREMENTS


  
  
Description Of Work
  
  
  
  
AdditionalRequirements
Resources
  
Bridges – Spans Over 200’023
Two (2) Bridge Design EngineersOne (1) P.E.P.E.
An example of highway bridge plans may be required, depending on past
experience shown in Key Personnel’s resume(s).
Melissa Flores, 919 707-6406,  mflores@ncdot.gov
Bridges – Spans Under 200’024
Two (2) Bridge Design EngineersOne (1) P.E.P.E.
An example of highway bridge plans may be required, depending on past experience shown in Key Personnel’s resume(s).
Melissa Flores, 919 707-6406, mflores@ncdot.gov
NBIS Bridge Inspection143
NBIS Safety Inspection of Bridges
Team Leader(s)P.E.P.E.
Non-PE Inspection Team Leaders must have at least five (5) years of bridge safety inspection experience and must have successfully completed the NHI two week Safety Inspection of In-Service Bridges Course 130055. PE Team Leaders must have successfully completed the NHI two week Safety Inspection of In-Service Bridges Course 130055. Firm must demonstrate its ability to perform inspections using the NCDOT WIGINS program.
Melissa Flores, 919 707-6406, mflores@ncdot.gov
Load Testing & Finite Analysis319
Field Load Testing and Finite Element Modeling of Structures
Two (2) EngineersOne (1) P.E.5P.E.
Must demonstrate that it has Field Tested a minimum of five (5) structures. Must submit samples of work including calculations, finite element models and load test results. Firm is responsible for turnkey job including trucks and traffic control for the field load test.
Melissa Flores,919 707-6406, mflores@ncdot.gov
Electrical and Mechanical Design for Moveable Bridge Systems329
Provide inspection, rehabilitation, troubleshooting and design for electrical and mechanical systems on moveable span bridges.
One (1) Electrical and One (1) Mechanical EngineerP.E.10P.E.
Must submit examples of work over the past 10 years that indicate experience with electrical and mechanical systems on moveable span bridges.
Melissa Flores, 919 707-6406, mflores@ncdot.gov
Load Rating444
Load Rating of NBIS Structures
Two (2) EngineersOne (1) P.E.3P.E.
Must submit samples of work. Firm may be required to demonstrate ability to perform finite element analysis, rate gusset plates, rate curved girder bridges, rate segmental bridges, rate cable stayed bridges and rate reinforced concrete box culverts. Must submit results in a format that is compatible with NCDOT Standards.
Melissa Flores, 919 707-6406,  mflores@ncdot.gov
Structure Durability Analysis/Condition Assessment486
Provide service life evaluation of bridges
EngineerP.E.10P.E.
Must submit examples of work over the past 10 years that indicate experience with the use of numerical modeling software to provide probabilistic assessment of residual service life.
Melissa Flores,919 707-6406, mflores@ncdot.gov
Non Destructive Testing & Evaluation487
Testing and evaluation of bridge deterioration
EngineerP.E.10P.E.
Must submit examples of work over the past 10 years that indicate experience with the use of NDT/NDE techniques (GPR, IR, UT, laser measurement, etc) to determine deterioration levels of bridge decks, superstructure and substructure.
Melissa Flores, 919 707-6406, mflores@ncdot.gov
Structure Health Monitoring488
EngineerP.E.10P.E.
Must submit examples of work over the past 10 years that indicate experience with instrumentation, detailed interpretation of results, and recommendations on load rating and/or safety of highway structures.
Melissa Flores, 919 707-6406, mflores@ncdot.gov
Bridge Painting QA/QC489
Construction engineering and inspection
Project ManagerPE and NACE Level III10P.E.
Technicians performing work shall have a minimum of 12 months field painting inspection experience, be NACE Level I certified (or equivalent), and have completed the NCDOT M&T Inspector Level I Certification course.
Melissa Flores, 919 707-6406, mflores@ncdot.gov
Asset Management System Implementation537
Engineering support for related
functionality in the Department’s Asset
Management System (AMS)
Team LeaderOne (1) P.E.5P.E.
Demonstrate experience in Asset Management System functionality.
Melissa Flores, 919 707-6406, mflores@ncdot.gov
Bridge Management Best Practices538
Engineering support for structures related functionality in the
Department’s Asset Management
System (AMS)
Team LeaderOne (1) P.E.5P.E.
Demonstrate experience in both Asset Management System functionality and expertise in bridge management best practices.
Melissa Flores, 919 707-6406, mflores@ncdot.gov
Was this page helpful?