Work Codes

Change Log

Click to view list of changes.

Work Codes

The work code descriptions below are intended to provide a general description of the work to be performed and do not constitute a standard or specification. For further information refer to the North Carolina Standard Specifications for Roads and Structures

Only select work codes your own forces can accomplish or that which you offer as a business service.

Do NOT select work codes that you subcontract.

* = Copy of North Carolina License must be attached for this work code

Reset GO

Reset GO

Type of Work	Work Code	Description of Work	Work Experience Last Five Years	Equipment List	Employee Requirements
Building, Framing	4000	Excavate and construct the foundation, construct vertical and horizontal members of the exterior walls, interior partition walls, ceiling joists, rafters, sheathing and waterproofing as detailed on the plans.
* Plumbing	4010	* Install or replace pipes and fixtures for water distribution and sanitary sewer disposal. Contractors performing this work code must posess and provide a copy of (certificate or number) a valid North Carolina plumbing license.
* Mechanical (HVAC)	4020	* Install or replace heating systems, air conditioning, and duct work as detailed on the plans.Contractors performing this work code must posess and provide a copy of (certificate or number) a valid North Carolina heating license.
* Electrical	4030	* Install or replace building electrical systems. Contractors performing this work code must posess and provide a copy of (certificate or number) a valid North Carolina electrical license.
Masonry (Buildings, not drainage structures)	4040	Furnish and install brick or masonry block as detailed on the plans.
Doors and Windows	4080	Furnish and install interior and exterior doors and windows as detailed on the plans.
Carpet	4090	Furnish and install carpet as detailed on the plans.
Tile	4100	Furnish and install floor and bathroom tile as detailed on the plans.
Toilet Accessories	4110	Furnish and install toilet accessories (e.g. toilet paper dispenser) as detailed on the plans.
Toilet Partitions	4120	Furnish and install toilet partitions as detailed on the plans.
Signs (inside the building)	4130	Furnish and install flush mounted signs (e.g. mens room, womens room) and exit signs as detailed on the plans.
Painting	4140	Furnish and paint interior and exterior walls as detailed on the plans.
Irrigation	4150	Furnish and install subsurface sprinkler equipment including lines and sprinkler heads to supply water under pressure.
Well Drilling	4180	Perform drilling of well for water to the appropriate depth. Contractor must install well casing, grout around the exterior of the casing, pump and motor as specified on the plans.
Building Movers	4190	Relocate entire building structure to a new location using hydraulic dolly (or similar method) as detailed on the plans. Contractor will be responsible for coordinating any required utility relocation (if applicable).

Was this page helpful?

Yes
No

© North Carolina Dept. of Transportation |
Privacy Statement |
Accessibility